New Features
1. Supported Z31 and Z91 camera via ONVIF.
2. Supported Mobotix c25.
Enhancements
1. The movement sensitivity improvement of PTZ joystick.
2. Supported connecting to another NVR server from Workstation login page when the Workstation is running on Windows Embedded 7.
3. Added showing warring message when the free spec detection before beginning NVR installation is not enough. (The free space of system storage is not less than 10GB, and total system storage must be more than 64GB.)
4. The default session timeout of RTP/UDP is set to 60 seconds.
Issues Solved
1. Fixed the recording gaps during playback when using Speed Up recording.
2. The System Log may freeze on searching or not responding sometimes.
3. PTZ start / stop url command using non- ACTi protocol cannot work via NVR.
4. The "Tracking" and "Start Scan" buttons should be hidden when PTZ method is set to Serial Hex.
5. NVR may freeze in Live page after leaving from password protection page.
6. Show script error sometimes after pressing "Advanced" button in PTZ setting page.
7. Show script error sometimes after adding ONVIF PTZ camera.
8. Fixed the Zoom In and Zoom Out buttons in PTZ panel for ONVIF camera to be disabled.
9. When adding the ONVIF camera and PTZ settings are not configured yet, the PTZ function may not work.
10. The hotkey functions should be ignored when NVR is switching page among Live, Playback or Setup.
11. The quantity of Q950 shall be two digital inputs and one digital output.
12. Fixed the ONVIF event integration about subscribe method and renew request.
13. Pan/Tilt/Zoom speed settings update for ONVIF PTZ Continuous mode.
14. Show script error sometimes after restoring the configurations with NVR Workstation.
Download
NVR 3 Corporate Server and Workstation (free Member Center registration required)
NVR 3 Corporate Workstation (free Member Center registration required)
Release Notes (PDF)